OK
PASS testpylith.py (exit status: 0)
make[7]: Leaving directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/quad4'
make[6]: Leaving directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/quad4'
make[5]: Leaving directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/quad4'
Making check in tri3
make[5]: Entering directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/tri3'
for f in TestTri3.py TestAxialDisp.py axialdisp_soln.py axialdisp_gendb.py TestShearDisp.py TestShearDispNoSlip.py TestShearDispNoSlipRefine.py TestShearDispFriction.py sheardisp_soln.py sheardisp_gendb.py TestSlipOneFault.py sliponefault_soln.py TestSlipTwoFaults.py sliptwofaults_soln.py TestFaultsIntersect.py geometry.jou mesh.jou mesh.exo matprops.spatialdb axialdisp.cfg sheardisp.cfg sheardispnoslip.cfg sheardispnosliprefine.cfg sheardispfriction.cfg sliponefault.cfg points.txt sliptwofaults.cfg faultsintersect.cfg; do /bin/bash /home/jenekew/build/pylith/pylith-2.2.1/aux-config/install-sh -c -m 644 ../../../../pylith-2.2.1/tests_auto/2d/tri3/$f ../../../tests_auto/2d/tri3; done
make check-am
make[6]: Entering directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/tri3'
make testpylith.py
make[7]: Entering directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/tri3'
make[7]: Nothing to be done for '../../../../pylith-2.2.1/tests_auto/2d/tri3/testpylith.py'.
make[7]: Leaving directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/tri3'
make check-TESTS check-local
make[7]: Entering directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/tri3'
make[8]: Entering directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/tri3'
PASS: testpylith.py
============================================================================
Testsuite summary for PyLith 2.2.1
============================================================================
# TOTAL: 1
# PASS: 1
# SKIP: 0
# XFAIL: 0
# FAIL: 0
# XPASS: 0
# ERROR: 0
============================================================================
make[8]: Leaving directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/tri3'
for f in testpylith.py.log; do printf "\n=== $f ===\n\n"; cat $f; done
=== testpylith.py.log ===
test_elastic_info (TestAxialDisp.TestAxialDisp) ... /home/jenekew/pylith/lib/python2.7/site-packages/h5py-2.7.1-py2.7-linux-x86_64.egg/h5py/__init__.py:36: FutureWarning: Conversion of the second argument of issubdtype from `float` to `np.floating` is deprecated. In future, it will be treated as `np.float64 == np.dtype(float).type`.
from ._conv import register_converters as _register_converters
--------------------------------------------------------------------------
[[25811,1],0]: A high-performance Open MPI point-to-point messaging module
was unable to find any relevant network interfaces:
Module: OpenFabrics (openib)
Host: jenekew-Nitro-AN515-54
Another transport will be used instead, although this may result in
lower performance.
NOTE: You can disable this warning by setting the MCA parameter
btl_base_warn_component_unused to 0.
--------------------------------------------------------------------------
/home/jenekew/pylith/lib/python2.7/site-packages/h5py-2.7.1-py2.7-linux-x86_64.egg/h5py/__init__.py:36: FutureWarning: Conversion of the second argument of issubdtype from `float` to `np.floating` is deprecated. In future, it will be treated as `np.float64 == np.dtype(float).type`.
from ._conv import register_converters as _register_converters
ok
test_elastic_statevars (TestAxialDisp.TestAxialDisp) ... ok
test_soln (TestAxialDisp.TestAxialDisp) ... ok
test_elastic_info (TestShearDisp.TestShearDisp) ... --------------------------------------------------------------------------
[[25838,1],0]: A high-performance Open MPI point-to-point messaging module
was unable to find any relevant network interfaces:
Module: OpenFabrics (openib)
Host: jenekew-Nitro-AN515-54
Another transport will be used instead, although this may result in
lower performance.
NOTE: You can disable this warning by setting the MCA parameter
btl_base_warn_component_unused to 0.
--------------------------------------------------------------------------
/home/jenekew/pylith/lib/python2.7/site-packages/h5py-2.7.1-py2.7-linux-x86_64.egg/h5py/__init__.py:36: FutureWarning: Conversion of the second argument of issubdtype from `float` to `np.floating` is deprecated. In future, it will be treated as `np.float64 == np.dtype(float).type`.
from ._conv import register_converters as _register_converters
ok
test_elastic_statevars (TestShearDisp.TestShearDisp) ... ok
test_soln (TestShearDisp.TestShearDisp) ... ok
test_elastic_info (TestShearDispNoSlip.TestShearDispNoSlip) ... --------------------------------------------------------------------------
[[26408,1],1]: A high-performance Open MPI point-to-point messaging module
was unable to find any relevant network interfaces:
Module: OpenFabrics (openib)
Host: jenekew-Nitro-AN515-54
Another transport will be used instead, although this may result in
lower performance.
NOTE: You can disable this warning by setting the MCA parameter
btl_base_warn_component_unused to 0.
--------------------------------------------------------------------------
/home/jenekew/pylith/lib/python2.7/site-packages/h5py-2.7.1-py2.7-linux-x86_64.egg/h5py/__init__.py:36: FutureWarning: Conversion of the second argument of issubdtype from `float` to `np.floating` is deprecated. In future, it will be treated as `np.float64 == np.dtype(float).type`.
from ._conv import register_converters as _register_converters
/home/jenekew/pylith/lib/python2.7/site-packages/h5py-2.7.1-py2.7-linux-x86_64.egg/h5py/__init__.py:36: FutureWarning: Conversion of the second argument of issubdtype from `float` to `np.floating` is deprecated. In future, it will be treated as `np.float64 == np.dtype(float).type`.
from ._conv import register_converters as _register_converters
[jenekew-Nitro-AN515-54:3607099] 1 more process has sent help message help-mpi-btl-base.txt / btl:no-nics
[jenekew-Nitro-AN515-54:3607099] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages
ok
test_elastic_statevars (TestShearDispNoSlip.TestShearDispNoSlip) ... ok
test_fault_data (TestShearDispNoSlip.TestShearDispNoSlip) ... ok
test_fault_info (TestShearDispNoSlip.TestShearDispNoSlip) ... ok
test_soln (TestShearDispNoSlip.TestShearDispNoSlip) ... ok
test_elastic_info (TestShearDispFriction.TestShearDispFriction) ... --------------------------------------------------------------------------
[[26530,1],1]: A high-performance Open MPI point-to-point messaging module
was unable to find any relevant network interfaces:
Module: OpenFabrics (openib)
Host: jenekew-Nitro-AN515-54
Another transport will be used instead, although this may result in
lower performance.
NOTE: You can disable this warning by setting the MCA parameter
btl_base_warn_component_unused to 0.
--------------------------------------------------------------------------
/home/jenekew/pylith/lib/python2.7/site-packages/h5py-2.7.1-py2.7-linux-x86_64.egg/h5py/__init__.py:36: FutureWarning: Conversion of the second argument of issubdtype from `float` to `np.floating` is deprecated. In future, it will be treated as `np.float64 == np.dtype(float).type`.
from ._conv import register_converters as _register_converters
/home/jenekew/pylith/lib/python2.7/site-packages/h5py-2.7.1-py2.7-linux-x86_64.egg/h5py/__init__.py:36: FutureWarning: Conversion of the second argument of issubdtype from `float` to `np.floating` is deprecated. In future, it will be treated as `np.float64 == np.dtype(float).type`.
from ._conv import register_converters as _register_converters
/home/jenekew/pylith/lib/python2.7/site-packages/h5py-2.7.1-py2.7-linux-x86_64.egg/h5py/__init__.py:36: FutureWarning: Conversion of the second argument of issubdtype from `float` to `np.floating` is deprecated. In future, it will be treated as `np.float64 == np.dtype(float).type`.
from ._conv import register_converters as _register_converters
[jenekew-Nitro-AN515-54:3607217] 2 more processes have sent help message help-mpi-btl-base.txt / btl:no-nics
[jenekew-Nitro-AN515-54:3607217] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages
ok
test_elastic_statevars (TestShearDispFriction.TestShearDispFriction) ... ok
test_fault_data (TestShearDispFriction.TestShearDispFriction) ... ok
test_fault_info (TestShearDispFriction.TestShearDispFriction) ... ok
test_soln (TestShearDispFriction.TestShearDispFriction) ... ok
test_elastic_info (TestShearDispNoSlipRefine.TestShearDispNoSlipRefine) ... --------------------------------------------------------------------------
[[26188,1],1]: A high-performance Open MPI point-to-point messaging module
was unable to find any relevant network interfaces:
Module: OpenFabrics (openib)
Host: jenekew-Nitro-AN515-54
Another transport will be used instead, although this may result in
lower performance.
NOTE: You can disable this warning by setting the MCA parameter
btl_base_warn_component_unused to 0.
--------------------------------------------------------------------------
/home/jenekew/pylith/lib/python2.7/site-packages/h5py-2.7.1-py2.7-linux-x86_64.egg/h5py/__init__.py:36: FutureWarning: Conversion of the second argument of issubdtype from `float` to `np.floating` is deprecated. In future, it will be treated as `np.float64 == np.dtype(float).type`.
from ._conv import register_converters as _register_converters
/home/jenekew/pylith/lib/python2.7/site-packages/h5py-2.7.1-py2.7-linux-x86_64.egg/h5py/__init__.py:36: FutureWarning: Conversion of the second argument of issubdtype from `float` to `np.floating` is deprecated. In future, it will be treated as `np.float64 == np.dtype(float).type`.
from ._conv import register_converters as _register_converters
/home/jenekew/pylith/lib/python2.7/site-packages/h5py-2.7.1-py2.7-linux-x86_64.egg/h5py/__init__.py:36: FutureWarning: Conversion of the second argument of issubdtype from `float` to `np.floating` is deprecated. In future, it will be treated as `np.float64 == np.dtype(float).type`.
from ._conv import register_converters as _register_converters
[jenekew-Nitro-AN515-54:3607391] 2 more processes have sent help message help-mpi-btl-base.txt / btl:no-nics
[jenekew-Nitro-AN515-54:3607391] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages
ok
test_elastic_statevars (TestShearDispNoSlipRefine.TestShearDispNoSlipRefine) ... ok
test_fault_data (TestShearDispNoSlipRefine.TestShearDispNoSlipRefine) ... ok
test_fault_info (TestShearDispNoSlipRefine.TestShearDispNoSlipRefine) ... ok
test_soln (TestShearDispNoSlipRefine.TestShearDispNoSlipRefine) ... ok
test_elastic_info (TestSlipOneFault.TestSlipOneFault) ... --------------------------------------------------------------------------
[[24862,1],0]: A high-performance Open MPI point-to-point messaging module
was unable to find any relevant network interfaces:
Module: OpenFabrics (openib)
Host: jenekew-Nitro-AN515-54
Another transport will be used instead, although this may result in
lower performance.
NOTE: You can disable this warning by setting the MCA parameter
btl_base_warn_component_unused to 0.
--------------------------------------------------------------------------
/home/jenekew/pylith/lib/python2.7/site-packages/h5py-2.7.1-py2.7-linux-x86_64.egg/h5py/__init__.py:36: FutureWarning: Conversion of the second argument of issubdtype from `float` to `np.floating` is deprecated. In future, it will be treated as `np.float64 == np.dtype(float).type`.
from ._conv import register_converters as _register_converters
ok
test_elastic_statevars (TestSlipOneFault.TestSlipOneFault) ... ok
test_fault_data (TestSlipOneFault.TestSlipOneFault) ... ok
test_fault_info (TestSlipOneFault.TestSlipOneFault) ... ok
test_points_data (TestSlipOneFault.TestSlipOneFault) ... ok
test_soln (TestSlipOneFault.TestSlipOneFault) ... ok
test_elastic_info (TestSlipTwoFaults.TestSlipTwoFaults) ... --------------------------------------------------------------------------
[[24920,1],0]: A high-performance Open MPI point-to-point messaging module
was unable to find any relevant network interfaces:
Module: OpenFabrics (openib)
Host: jenekew-Nitro-AN515-54
Another transport will be used instead, although this may result in
lower performance.
NOTE: You can disable this warning by setting the MCA parameter
btl_base_warn_component_unused to 0.
--------------------------------------------------------------------------
/home/jenekew/pylith/lib/python2.7/site-packages/h5py-2.7.1-py2.7-linux-x86_64.egg/h5py/__init__.py:36: FutureWarning: Conversion of the second argument of issubdtype from `float` to `np.floating` is deprecated. In future, it will be treated as `np.float64 == np.dtype(float).type`.
from ._conv import register_converters as _register_converters
ok
test_elastic_statevars (TestSlipTwoFaults.TestSlipTwoFaults) ... ok
test_fault_data (TestSlipTwoFaults.TestSlipTwoFaults) ... ok
test_fault_info (TestSlipTwoFaults.TestSlipTwoFaults) ... ok
test_soln (TestSlipTwoFaults.TestSlipTwoFaults) ... ok
test_elastic_info (TestFaultsIntersect.TestFaultsIntersect) ... --------------------------------------------------------------------------
[[24986,1],0]: A high-performance Open MPI point-to-point messaging module
was unable to find any relevant network interfaces:
Module: OpenFabrics (openib)
Host: jenekew-Nitro-AN515-54
Another transport will be used instead, although this may result in
lower performance.
NOTE: You can disable this warning by setting the MCA parameter
btl_base_warn_component_unused to 0.
--------------------------------------------------------------------------
/home/jenekew/pylith/lib/python2.7/site-packages/h5py-2.7.1-py2.7-linux-x86_64.egg/h5py/__init__.py:36: FutureWarning: Conversion of the second argument of issubdtype from `float` to `np.floating` is deprecated. In future, it will be treated as `np.float64 == np.dtype(float).type`.
from ._conv import register_converters as _register_converters
ok
test_elastic_statevars (TestFaultsIntersect.TestFaultsIntersect) ... ok
test_fault_data (TestFaultsIntersect.TestFaultsIntersect) ... ok
test_fault_info (TestFaultsIntersect.TestFaultsIntersect) ... ok
test_soln (TestFaultsIntersect.TestFaultsIntersect) ... ok
----------------------------------------------------------------------
Ran 37 tests in 25.195s
OK
PASS testpylith.py (exit status: 0)
make[7]: Leaving directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/tri3'
make[6]: Leaving directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/tri3'
make[5]: Leaving directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/tri3'
Making check in slipdir
make[5]: Entering directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/slipdir'
for f in TestTri3.py TestFaultX.py TestFaultY.py TestFaultXYP.py TestFaultXYN.py genspatialdb.py solution.py geometry.jou mesh.jou mesh.exo matprops.spatialdb faultx.cfg faulty.cfg faultxyp.cfg faultxyn.cfg; do /bin/bash /home/jenekew/build/pylith/pylith-2.2.1/aux-config/install-sh -c -m 644 ../../../../pylith-2.2.1/tests_auto/2d/slipdir/$f ../../../tests_auto/2d/slipdir; done
make check-am
make[6]: Entering directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/slipdir'
make testpylith.py
make[7]: Entering directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/slipdir'
make[7]: Nothing to be done for '../../../../pylith-2.2.1/tests_auto/2d/slipdir/testpylith.py'.
make[7]: Leaving directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/slipdir'
make check-TESTS check-local
make[7]: Entering directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/slipdir'
make[8]: Entering directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/slipdir'
FAIL: testpylith.py
============================================================================
Testsuite summary for PyLith 2.2.1
============================================================================
# TOTAL: 1
# PASS: 0
# SKIP: 0
# XFAIL: 0
# FAIL: 1
# XPASS: 0
# ERROR: 0
============================================================================
See tests_auto/2d/slipdir/test-suite.log
Please report to cig-short@geodynamics.org
============================================================================
make[8]: *** [Makefile:655: test-suite.log] Error 1
make[8]: Leaving directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/slipdir'
make[7]: *** [Makefile:763: check-TESTS] Error 2
make[7]: Leaving directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/slipdir'
make[6]: *** [Makefile:834: check-am] Error 2
make[6]: Leaving directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/slipdir'
make[5]: *** [Makefile:836: check] Error 2
make[5]: Leaving directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d/slipdir'
make[4]: *** [Makefile:441: check-recursive] Error 1
make[4]: Leaving directory '/home/jenekew/build/pylith/pylith-build/tests_auto/2d'
make[3]: *** [Makefile:441: check-recursive] Error 1
make[3]: Leaving directory '/home/jenekew/build/pylith/pylith-build/tests_auto'
make[2]: *** [Makefile:507: check-recursive] Error 1
make[2]: Leaving directory '/home/jenekew/build/pylith/pylith-build'
make[1]: *** [Makefile:1406: pylith] Error 2
make[1]: Leaving directory '/home/jenekew/build/pylith'
make: *** [Makefile:1418: installed_pylith] Error 2