# Axialdisp cannot be reproduced in examples/twocells/twohex8

**URL:** <https://community.geodynamics.org/t/axialdisp-cannot-be-reproduced-in-examples-twocells-twohex8/692>\
**Category:** PyLith\
**Tags:** examples\
**Created:** [June 23, 2019, 12:07pm UTC](https://community.geodynamics.org/t/axialdisp-cannot-be-reproduced-in-examples-twocells-twohex8/692 "2019-06-23T12:07:36Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![liuxiaoge](https://avatars.discourse-cdn.com/v4/letter/l/d78d45/32.png) [@liuxiaoge](https://community.geodynamics.org/u/liuxiaoge)\
**Post date:** [June 23, 2019, 12:07pm UTC](https://community.geodynamics.org/t/axialdisp-cannot-be-reproduced-in-examples-twocells-twohex8/692/1 "2019-06-23T12:07:36Z")

</div>

Dear CIG team,  
I am new to pylith, and I try to reproduce the examples in the V2.2.1 manual. I encountered trouble when I run the command: _ **pylith dislocation.cfg** _ in the example: **7.6.6 Kinematic Fault Slip Example**. there no error report, but the output result **dislocation\_t011.vtk** opened in Paraview is unlike the figure 7.16 in manual.  
I reproduced result.

 ![dislocation](https://canada1.discourse-cdn.com/flex036/uploads/geodynamics/original/1X/5252a2588bbd0a681d8f7c7a7e2a22d067565d59.png)  
figure 7.16 in manual.  
 ![image](https://canada1.discourse-cdn.com/flex036/uploads/geodynamics/original/1X/2477cba8f0fbe734f859fb991b5c966475490189.jpeg)

could you guys give me some suggestions?

best wishes,  
xiaoge.

---

<div class="post-metadata">

**Author:** ![baagaard](https://yyz2.discourse-cdn.com/flex036/user_avatar/community.geodynamics.org/baagaard/32/615_2.png) [@baagaard](https://community.geodynamics.org/u/baagaard)\
**Post date:** [June 23, 2019, 9:54pm UTC](https://community.geodynamics.org/t/axialdisp-cannot-be-reproduced-in-examples-twocells-twohex8/692/2 "2019-06-23T21:54:15Z")

</div>

It looks like the simulation may have run correctly, and you just need to make some adjustments within ParaView. It looks like you color scale has different limits and the glyph vectors may not be scaled by the displacement (all vectors seem to be the same length independent of the displacement magnitude). See the ParaView documentation for more informationl